I'm building a master image for my new Horizon 7.9 deployment with Dell Wyse P25 Firmware 6.4; however I have not made it too far.
I have just built a fresh AGM OEM/Standalone 1809 1.0.4 Windows 10 VMware VM. I have only loaded the Active Client v 7.1.0.244 and my CAC reader I'm using is SCR3310. I have 2 CAC readers, one built into my laptop and the SCR3310 connected to a USB port. I'm using the VMware Remote Console to try and log into the machine with my Administrative CAC; however I get an error telling me "No valid certificates were found on this smart card. Please try another smart card or contact your administrator." If I use my normal DoD CAC it reads those cards with no issues.
Here are some steps I have done to try and trouble shoot the issue.
- Launch VMRC
- Connect CAC reader from VMRC
- Insert my Admin CAC
- Then I get the error.
- When I log in locally to the machine:
- I see the CAC reader in device manager
- I insert the CAC and it shows up in device manager
- Open ActivClient, it sees the CAC reader
- It starts to scan my card, it scan's then it disconnects the card reader and card from device manager and I get a Windows Box telling me to connect a card reader. The reader is still connected in VMRC, but not in Windows device manager.
If I use RDP I can get in fine with my Admin CAC.
I have not loaded the View client as of yet, because I need to be able to log in with my Admin CAC.